JBC 210 Rework Solder Station Fast Heat Electric Soldering Iron Welding Stations

JBC 210 Rework Solder Station Fast Heat Electric Soldering Iron Welding Stations
JBC 210 Rework Solder Station Fast Heat Electric Soldering Iron Welding Stations
JBC 210 Rework Solder Station Fast Heat Electric Soldering Iron Welding Stations
JBC 210 Rework Solder Station Fast Heat Electric Soldering Iron Welding Stations
JBC 210 Rework Solder Station Fast Heat Electric Soldering Iron Welding Stations
JBC 210 Rework Solder Station Fast Heat Electric Soldering Iron Welding Stations

JBC 210 Rework Solder Station Fast Heat Electric Soldering Iron Welding Stations
JBC 210 Rework Solder Station Fast Heat Electric Soldering Iron Welding Stations. IN PUT VOTAGE AC 100-240V. DisplayOLED 1.3 nch. Long press the encoder to enter the first level menu, rotate the encoder to select the second level menu you want to enter, and short press to enter the second level menu. Rotate the encoder again, move the cursor to the specific parameter that needs to be modified, and short press the encoder to select the content (the option value is displayed behind the text after selection). Rotate the encoder again to modify the value. After the modification is completed, short press the encoder to cancel the selection (the option value disappears after canceling the selection). Rotate the encoder again to move the cursor to other parameters. To exit the first-level menu and the second-level menu, you need to long press the encoder, and the long press time is 1s. When the soldering iron enters the “standby mode”, the working temperature is set to 50-500. If the value of this option is less than 50, it will not be heated during sleep. Enter Boot-Temp, you can set the default set temperature of the soldering iron required after booting. If you want the soldering station to save the set temperature value at the last shutdown, you can set this option to “0”. During the calibration process, if the actual temperature is lower than the set temperature, increase the AD value; if the actual temperature is higher than the set temperature, decrease the AD value. 0°C and 600°C are generally the default values without adjustment. When calibrating the soldering iron tip, remember that this set of data must be strictly increased from small to large, otherwise the temperature is invalid. For example, if before calibration: 100, AD=110; 200, AD=270; 300, AD = 380, when calibrating 200, the temperature is less than 200, you need to increase the AD value from 270, but its size It cannot exceed the AD value of 380 at 300°C. If the temperature cannot reach 200°C when the temperature is adjusted from 270 to 380, it means that the value of 380 at 300°C is also too small. You need to increase the 380 at 300°C first. 4.1 Sleep Time. Press and hold the encoder for 2 seconds to enter Other SetSleep-tim—according to your choice, the setting range is 0-60 minutes, the default is 1minutes, when in sleep state, the temperature of the soldering iron tip will be reduced to protect the life of the soldering iron tip , Press 2 sencond quit. Press and hold the encoder for 2 seconds to enter Other SetIf you need to restore the factory settings, set the position to 1, and the soldering iron will restart after exiting the menu, and all parameters will be restored to the factory settings. Iron tip do not work continuously high temperature, high temperature work is easy to damage the tip! Ordinary solder melting point is 183°C, lead-free solder melting point is 227°C, usually the welding temperature is 300-380°C, 380°C is the temperature of the dividing line, higher than 380°C, iron head oxidation and loss is extremely fast, seriously affect the heating core life The Higher than 380°C temperature display will be beating, the higher the temperature, the greater the beating! Recommended in the 300-380°C for welding work, most of the work can be carried out, the temperature beating is normal, does not affect the use! The soldering iron used in this soldering station is a brand new soldering iron tip. Due to the unstable resistance of the new soldering iron tip, the temperature will jump or ERROR, which is normal. After several times of use, the stability will gradually stabilize. All items will be checked carefully and packages in good condition. Arrival time depends on your location. We will 100% solve any problems for you. Our goal is to provide high quality products with competitive prices and excellent customer service to our buyers. We will work with you until you are satisfied. Please give us the opportunity to resolve any problems. We will try our best to solve any dispute and satisfy our customers. 100 % Satisfaction Guaranteed!! The item “JBC 210 Rework Solder Station Fast Heat Electric Soldering Iron Welding Stations” is in sale since Sunday, August 8, 2021. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Welding & Soldering Tools”. The seller is “js_lucky_e_mart” and is located in Shanghai. This item can be shipped worldwide.
  • Model: T210
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Power Source: Corded Electric
  • Type: Soldering Gun
  • MPN: Does not Apply
  • Brand: Unbranded
  • Voltage: 100V-240V

JBC 210 Rework Solder Station Fast Heat Electric Soldering Iron Welding Stations

Comments are closed.