Rework Soldering Station HOT AIR GUN Solder IRON T12 Pireg Soldier with battery

Rework Soldering Station HOT AIR GUN Solder IRON T12 Pireg Soldier with battery
Rework Soldering Station HOT AIR GUN Solder IRON T12 Pireg Soldier with battery
Rework Soldering Station HOT AIR GUN Solder IRON T12 Pireg Soldier with battery
Rework Soldering Station HOT AIR GUN Solder IRON T12 Pireg Soldier with battery
Rework Soldering Station HOT AIR GUN Solder IRON T12 Pireg Soldier with battery
Rework Soldering Station HOT AIR GUN Solder IRON T12 Pireg Soldier with battery
Rework Soldering Station HOT AIR GUN Solder IRON T12 Pireg Soldier with battery
Rework Soldering Station HOT AIR GUN Solder IRON T12 Pireg Soldier with battery
Rework Soldering Station HOT AIR GUN Solder IRON T12 Pireg Soldier with battery
Rework Soldering Station HOT AIR GUN Solder IRON T12 Pireg Soldier with battery

Rework Soldering Station HOT AIR GUN Solder IRON T12 Pireg Soldier with battery
Who can use – Gadgets and electronics repairmen – Technical specialists of all profiles, where work is related to the soldering of radioelements – Home workshops – For electronic board assembly line. Specifications – Soldering iron power 75 W – Soldering iron temperature range, customizable, 50-500 ° C. Hair dryer (heating element) power 700 W – The maximum temperature of the hair dryer is up to 550 ° C. Automatic compensation of the cold junction temperature in the range of 9-99 ° C. PID temperature control, 2 ° C temperature stability (no load). 4 thermal profiles for different tips – Control box size 160 140 68mm – Automatic standby (the range of on time can be set to 1-60 min). Automatic sleep mode (turn-on time range can be set to 1-60 min). One 1.3 OLED display – Automatic sleep mode for hair dryer, put the handle on the holder for automatic cooling before unplugging. Digital adjustment of the air flow of the hair dryer (in percent). The hair dryer heats up quickly, 5 seconds to the set temperature, precise temperature control. Independent button for powering the hair dryer. Autonomous operation of the soldering iron 3-4 hours (built-in battery with automatic charging system). Phase adjustment of the power of the hair dryer (does not interfere with the mains) – Management, configuration and control of work via bluetooth from a smartphone or pc. What are the features of the Pireg Soldier belt station. The convenience of use. Soldering iron T12 – reaching the set temperature up to 5 seconds, temperature accuracy 1-2 degrees thanks to the temperature sensor in the tip, support for changing tips during hot soldering without turning off the soldering iron. This allows you to quickly and accurately solder elements of any size Hair dryer – heating up to 15 seconds, temperature accuracy 2-3 degrees thanks to the built-in PID controller. This allows you to quickly solder parts without fear of overheating the board or radio element. Possibility of autonomous work with a soldering iron up to 3 hours of autonomous work. You can take on field repairs, work in places where there is no way to connect to an outlet Sleep mode – if you did not turn off the soldering station and went home, nothing terrible will turn on, it will turn itself off Compact size 160 140 68 mm. Takes up little space on the table, which is especially important for quick repair points The presence of four thermal profiles for the soldering iron. High-quality assembly and element base will allow you to use Pireg equipment for a long time For which repairs Soldering station Pireg Soldier is suitable for repairing such devices: – Mobile phones, tablets, gadgets – Laptops, video cards, monoblocks – Boards from TVs and other television and audio equipment – Household appliances like microwave ovens, blenders, mixers, vacuum cleaners – Printing equipment like printers, copiers – Electric vehicles like electric scooters, gyroboards, segways – Repair of other electronics where soldering is required What does it consist of – Soldering iron – Soldering iron stand – T12 tip – Hair dryer – Hairdryer attachments – Control block. How to get started For soldering iron 1. Switch on the soldering station 2. Set the desired temperature of the soldering iron by turning the handle. It all depends on the solder. For a start, you can 250 degrees, and then be guided by how well the solder melts 3. Wait 3-5 seconds 4. Tinning the sting by dipping it into the flux, then into the solder 5. Soldering iron ready to work. For hair dryer 1. Set the desired temperature by turning the knob, usually 290 degrees 3. Set the air flow rate. You can start with 80% 4. Wait 20-30 seconds for the hair dryer to heat up 5. Hair dryer ready for use. The item “Rework Soldering Station HOT AIR GUN Solder IRON T12 Pireg Soldier with battery” is in sale since Tuesday, September 8, 2020. This item is in the category “Business & Industrial\CNC, Metalworking & Manufacturing\Welding & Soldering Equipment\Soldering/Desoldering Equipment & Accessories\Soldering Guns & Irons”. The seller is “pireg777″ and is located in Odessa. This item can be shipped worldwide.
  • Model: Pireg Soldier
  • Country/Region of Manufacture: Ukraine
  • Item Type: Soldering Station
  • Features: Ergo
  • Power: 800W
  • Brand: Pireg

Rework Soldering Station HOT AIR GUN Solder IRON T12 Pireg Soldier with battery

Comments are closed.