DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen

DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen
DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen
DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen
DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen
DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen
DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen
DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen
DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen
DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen
DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen
DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen

DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen
“Registered AU Local Business”. Designed/made by the qualified carpenter and for the real tradesman. 1x DIY soldering iron 50-500 Degrees for Makita 18v portable soldering station with soldering iron and LED display, Plus USB Output port and Tip Holder, rated 50w, perfect for electronic applications. It’s based on the powerful and well reviewed T12 console with comprehensive options to setup your own style of standby (duration/activate method), sleep, temp boost, battery low voltage protection etc. So whether you are really serious about soldering or just after a quick plug and work, it covers all sorts of needs, but now without the cord. Comes with T12 Hoof tip , can be changed to other types of tips. Some quick facts for your information. It’s powerful enough to get tin melt in 8 seconds. It has PID temperature control, and allows you to calibrate it. It allows you to set and save default temperatures based on different tips. It allows you to set up sleep/wakeup activation mode. It allows you to set up standby/sleep temperature. It has low voltage alarm/cutoff setting to protect your battery. And for sure, it allows you to setup temperature as you go. About runtime, with my style of use, a fully charged 5ah battery will last me 4-4.5 hours until it reached the cutoff voltage of 15.8V. The full menu options are as below, but remember you don’t necessarily need to touch every option if you don’t use it. You could just plug in, set up temperatures, and also the low voltage protection (I recommend go 15.8v which roughly indicates 85% of the battery capacity), than start to work, and adjusting the temperature as you go! Handy information before you work. Tin melting point is 183°C, lead-free tin melting point is 227°C, regular welding temperature is 300-380°C depending on what you are working with, but continuous run above 380 degree will significantly damage the tip so you should avoid it unless you really need to. The tips are consumables anyways. What temperature to use? These are just indications, it also depends on the type of tip in use. 260 for SMD. 300 for PCB electronics. 340 for components with thicker leads. 380 for heavier work with more mass or heat conduction. User Instruction for CrossFirePower 18V T12 Soldering Iron (50-500 degrees). Please fully insert T12 Lead Free hoof tip into the handle and connect the handle to the base. (Alternatively an Err/025 message will pop up on display). Apply base on your battery. Power on the base. Press the knob for 3 sec to opt into the menu (If you need to adjust). Temperature output controller: (Reckon to leave as is, adjust if you need to change output temperature precisely). Auto Power off Time. Fixed-Temperature When opt in Sleep mode. Room Temperature calibration (Reckon to leave as is). Brightness control of the screen (Level 1-5). Thermal/Temperature output control (Auto set at 300, increase if you need to). Menu lists options (Reckon to leave as is). Vibration: (Reckon to leave as is). Coding Direction: (Reckon to leave as is). Adjust to 01 and re-boot to reset. Press the knob for 3 Sec to opt out the menu. Please remove when not in use. The item “DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen” is in sale since Sunday, May 2, 2021. This item is in the category “Home & Garden\Tools & Workshop Equipment\Power Tools\Welding & Soldering Tools”. The seller is “crossfirepower_official_au” and is located in Carlton, VIC. This item can be shipped worldwide.
  • Power Source: Battery
  • Type: Soldering Gun
  • Brand: Crossfire
  • Voltage: 18 V

DIY Makita 18v portable soldering station/iron USB Port T12 console LED screen

Comments are closed.