KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit

KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit
KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit
KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit
KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit
KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit
KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit
KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit
KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit
KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit
KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit
KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit
KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit

KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit
The main function of welding station and performance characteristics: 1, temperature range of 150 480 C 2, the thermocouple cold junction temperature automatic compensation range -9-99C (to be more accurate). 3, PID temperature control, temperature stability 2C(no load). 4, can save 5 groups of temperature. 5, can save the temperature of each head calibration parameters, support all types of T12 head, and there are six custom head, can shield the less common head (in the menu tip management allows you to use the head). 6, automatic standby (time 1-60 minutes can be set). 7, automatic sleep (soft shutdown) (time 1-60 minutes can be set). 8, the latest version 2.1S comes with clock, voltage display, cut-off voltage settings and other functions. The main operation: 1, under normal circumstances, 1 second continuous counter-clockwise rotation below 3 cells into the standby default 200 degrees (150-300 degrees can be configured) state, if the set temperature is below 200 degrees directly into sleep. 1.1 Standby state, 1 second continuous counter-clockwise rotation 3 lattice sleep (soft shutdown), sleep (soft shutdown) state, short press the encoder to enter the working state. 1.2 Standby mode, press the encoder or clockwise rotation to restore the working state. Out of a menu. 2, under normal circumstances, 1 second clockwise rotation 3 consecutive grid into the power to enhance the current temperature +50 degrees (10-200 degrees can be configured), after 5 minutes (1-60 minutes can be set) after the automatic reply, It is also possible to recover the encoder in advance with any operation. 3, under normal circumstances, short press to enter the temperature setting state. 3.1 In the temperature setting state, the temperature of the current setting group can be adjusted by rotary encoder, the default step is 5 degrees (step 1-50 can be set). 3.2 In the temperature setting state, press and hold the rotary encoder and rotate to switch the setting group. 3.3 In the temperature setting state, short press the encoder to save and exit to the normal state. 4, under normal circumstances, hold down the encoder and clockwise rotation can change the head interface, the interface under the output off, you can live for the implementation of the first operation. You can toggle the header type. And call the relevant head of the more positive curve. 5, under normal circumstances, hold down the encoder and counterclockwise rotation can enter the temperature calibration interface, you can compare the current tip of the parameters, you can restore the default parameters of the correction. Before entering the wizard, you need to restore the default parameters. 6, under normal circumstances, press the encoder for 2 seconds to open the setup menu. 7, all settings interface and menu, press the encoder for 2 seconds can not save and exit. 1 T12 Soldering Station. Communication is always a best way to solve problem. We promise that we accept any return all over the world in 30 days. Please never return the parcel without agreement. From us, it is impossible for us to get the parcel, and we will take no further action for the return. It’ll take you one minute only. Your recognition is our motivation in developing our company and improving our service for each customer. If you’re not satisfied with our goods or service, please write to us immediately so that we can help you out. Sincerely hope you do not leave us any negative or neutral feedback. Communication is very important. We believe we can resolve all the problem with each other. We will protect every customer’s profit. You’re welcome to ask any questions you have. To you within 24 hours. (weekend and holidays excluded). The item “KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit” is in sale since Saturday, September 14, 2019. This item is in the category “Business, Office & Industrial\Other Business & Industrial”. The seller is “wetogether1″ and is located in Shenzhen. This item can be shipped worldwide.
  • Brand: Unbranded
  • MPN: Does not apply
  • UPC: Does not apply
  • EAN: Does not apply

KSGER STM32 OLED Soldering Station T12 Iron Tip V2.1S Controller Welding DIY Kit

Comments are closed.